Anodized Aluminum Sheet for Clean Room 5083 H116 H112

• Customization: Available
• Color: Silver
• Application: Door & Window, Decorations
• Model NO.: 3003 5052 5083 6061 7075
• Certification: ISO9001, ASTM, GB
• Technique: Extruded
• Grade: 5000 Series
• Temper: O - H112
• Surface Treatment: Anodic Oxidation
• Alloy: Alloy
• Thickness: 0.5-6.0mm
• Oxide Thickness: 5-30um
• Edge: Cut
• Tolerance: +/-0.1mm
• Composition: Al, Mn, Mg and Others
• T.S.: 345MPa
• Y.S.: 257MPa
• Transport Package: Standard Seaworthy Package
• Specification: Mn 0.4-1.0 Mg 4.0-4.9
• Trademark: Mereal Metal
• Origin: China
• HS Code: 76061220
• Production Capacity: 3000 Tons/Month

Product Description

Anodized Aluminum Sheet for Clean room 5083 H116 H112
 

1000 SERIES	1050 1060 1070 1100 representative series aluminum plate is also known as pure aluminum,  in the series in 1xxx series belongs to all the alumina quantity  of a maximum number of series. Purity can achieve 99.00% above.
3000 SERIES	3xxx series aluminum represents 3003 3004,3005, 3 A21 primarily. And can be called in the 3xxx series aluminum  antirust aluminum production process more  outstanding. The 3xxx series aluminum plate is by manganese as the main component. Content at 1.0-1.5 between.  Is a rust-proof function better series. Conventional  application in the air conditioning, the refrigerator, such as car in damp environment
5000 SERIES	5xxx series representatives 5052 5005 5083,5754. The 5000 series aluminum alloy aluminum belong to the more  commonly used series, the main elements for  magnesium, with magnesium in the amount between 3-5%. And can be called aluminum magnesium alloy. Key features  for low density, high tensile strength,  elongation rate is high. In the same area under the weight of the magnesium alloy aluminum less than other series.
6000 SERIES	6xxx series represents 6061 mainly contain magnesium and silicon of two elements, so focused on the 4000 series  and the advantages of the 5000 series 6061  is a cold treatment aluminum forging products, apply to fight against corrosion, oxidizing demanding applications.
8000 SERIES	8xxx series is relatively commonly used for 8011 belongs to other series. It is for major function cap of aluminum,  also used in the radiator, most applications for  the aluminum foil.

Type	Grade	Thickness	Width	Length
Pure Aluminum Plate	1050/1060/1100	0.15-350mm	less 2200mm	less 12000mm
Antirust Aluminum Plate	3003/3004	0.15-350mm	less 2200mm	less 12000mm
Aluminum Alloy Plate	5052/5754/5A05/5A06	0.15-350mm	less 2200mm	less 12000mm
Aluminum Alloy Plate	5083	0.15-500mm	less 2200mm	less 11000mm
Aluminum Alloy Plate	6061/6063/6082/6A02	0.8-150mm	less 2200mm	less 11000mm

  The so-called anodic oxidation of aluminum is an electrolytic oxidation process. In this process, the surface of aluminum and aluminum alloy is usually transformed into a layer of oxide film, which has protective, decorative and some other functional characteristics. From this definition, the anodizing of aluminum only includes the process of forming anodic oxide film.

  An oxide film is formed on the surface of metal or alloy parts by electrolysis. Metal oxide film changes the surface state and properties, such as surface coloring, improving corrosion resistance, enhancing wear resistance and hardness, protecting metal surface and so on. For example, aluminum anodizing, aluminum and its alloy are placed in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode for electrolysis under specific conditions and applied current. Anodized aluminum or its alloy forms a thin layer of alumina on the surface, with a thickness of 5 ~ 30 microns, and the hard anodized film can reach 25 ~ 150 microns. The anodized aluminum or its alloy improves its hardness and wear resistance, up to 250 ~ 500 kg / mm2, good heat resistance, the melting point of hard anodized film is up to 2320k, excellent insulation and breakdown voltage is up to 2000V, which enhances the corrosion resistance ω= 0.03 NaCl salt spray does not corrode after thousands of hours. The thin layer of oxide film has a large number of micropores, which can absorb various lubricants and is suitable for manufacturing engine cylinders or other wear-resistant parts; The membrane has strong microporous adsorption capacity and can be colored into various beautiful and gorgeous colors. Non ferrous metals or their alloys (such as aluminum, magnesium and their alloys) can be anodized. This method is widely used in mechanical parts, aircraft and automobile parts, precision instruments and radio equipment, daily necessities and architectural decoration.